[SI-LIST] : Field Extractor + Simulator

About this list Date view Thread view Subject view Author view

From: Christian S. Rode ([email protected])
Date: Tue Jan 25 2000 - 15:10:04 PST


Hello all,

Are we cool yet?

The field extractor interface now creates a form with the
Ls and Cs it extracts (for the 2-line case), which allows
you to perform some basic TL simulations. The model is
super simple - two voltage sources with finite impedance
driving (or not) each of two lines with termination to
the midpoint voltage. You can drive from either end of
the line and the other end becomes the terminated end.
If you want to not terminate just use a large value for
the terminating resistor, such as 1e9.

It's very prototype-ish and I'm sure there'll be new
bugs (please don't hesitate to drop a bug report on
me), but I hope it's of interest.

As usual, bugs, complaints, praise, etc. to
mailto:[email protected]

Regards,
Chris Rode

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:34:49 PDT