Re: [SI-LIST] : What's your favourite Screwy SI Concept and right angle bends?

About this list Date view Thread view Subject view Author view

From: [email protected]
Date: Fri Jan 14 2000 - 16:09:53 PST


Yup, ran into that problem in the late 70's also. Sure glad we learned
something in 20 years!

M

---------Included Message----------
> Date: Fri, 14 Jan 2000 12:20:11 -0800 (PST)
> From: "Hans Mellberg" <[email protected]>
> Reply-To: <[email protected]>
> To: <[email protected]>
> Subject: [SI-LIST] : What's your favourite Screwy SI Concept and
right angle bends?
>
> Way back then, we avoided right angle turns on PCB
> trace copper for another reason (and for the fabled
> reason too!). PCB manufacturing had an under-etch
> problem and to increase yileds we avoided right angle
> turns.
>
>
>
> =====
> Best Regards
> Hans Mellberg
> EMC Consultant
> __________________________________________________
> Do You Yahoo!?
> Talk to your friends online with Yahoo! Messenger.
> http://im.yahoo.com
>
> **** To unsubscribe from si-list: send e-mail to
[email protected]. In
> the BODY of message put: UNSUBSCRIBE si-list, for more help, put
HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****
>
---------End of Included Message----------
_____________________________________________________________
Tired of limited space on Yahoo and Hotmail?
Free 100 Meg email account available at http://www.dacafe.com

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:34:40 PDT