[SI-LIST] : What's your favourite Screwy SI Concept and right angle bends?

About this list Date view Thread view Subject view Author view

From: Hans Mellberg (emcconsultant@yahoo.com)
Date: Fri Jan 14 2000 - 12:20:11 PST


Way back then, we avoided right angle turns on PCB
trace copper for another reason (and for the fabled
reason too!). PCB manufacturing had an under-etch
problem and to increase yileds we avoided right angle
turns.

=====
Best Regards
Hans Mellberg
EMC Consultant
__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com

**** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:34:39 PDT