[SI-LIST] : backward Xtalk?

About this list Date view Thread view Subject view Author view

From: Long Wang ([email protected])
Date: Mon Jan 10 2000 - 11:30:04 PST


Hello,

I have a couple questions about backward crosstalk. In Ansoft 2D tool,
the backward crosstalk coefficient can be calculated. My questions are :
Assuming to consider 2 lines parallel each other, one line is active and
the other is a victim.
1. In the result matrix of Ansoft 2D tool, the diagonal element is 0.5.
What does that mean?
2. The off-diagonal element, for instance, is 0.01. Does it mean 1%
coupling from the active line? Does the backward crosstalk depend on
rise-time of a signal? If no, can you explain it?

Thanks a lot!

Long

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:34:31 PDT