RE: [SI-LIST] : What's your favourite Screwy SI Concept?

About this list Date view Thread view Subject view Author view

From: Haller, Robert (Robert.Haller@compaq.com)
Date: Thu Jan 06 2000 - 11:35:27 PST


Ok, I'll bite too.

Reporting the impedance of a PCB trace at 50.123 Ohms when measurement
accuracy is +/- .5 ohms at best.

Using a 40 ps TDR edge to measure propagation delay for a considerably
slower application.

Bob Haller
Compaq Computer Corporation

>Subject: [SI-LIST] : What's your favourite Screwy SI Concept?
>Cheers,
>Andrew Phillips
>Supercomputing Systems AG
>Zurich, Switzerland

**** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:34:28 PDT