Re: [SI-LIST] : IBIS datasheets for PCI and DDR

About this list Date view Thread view Subject view Author view

From: Scott McMorrow (scott@vasthorizons.com)
Date: Tue Nov 16 1999 - 11:09:22 PST


Chris Cheng wrote:

>
> spice only for DDR i/o but then again, why do
> u need ibis if u have the full spice......

Lets see ...
Faster performance in simulation by 10-100X ...
Encapsulation of standard measurement points ...
Encapsulation of package parameters ...
Equivalent or better accuracy depending on method of
creating and characterizing the model ...
More widespread simulator support.

Hmmm ... I can't imagine what the need or desire for
IBIS models would be.

regards,

scott

--
Scott McMorrow
Principal Engineer
SiQual, Signal Quality Engineering
18735 SW Boones Ferry Road
Tualatin, OR  97062-3090
(503) 885-1231
http://www.siqual.com


**** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:39:50 PST