Re: [SI-LIST] : Assistance with Quad model..

About this list Date view Thread view Subject view Author view

From: jonp@pacbell.net
Date: Fri Nov 12 1999 - 15:48:30 PST


Charles,

You can do this with a TOPSPEC.
It is essentially exactly as you have done it except with a TOPSPEC and
END_TOPSPEC instead of a model.
Look at the example in the manual or give customer support a call.

take care,
Jon

**** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:39:47 PST