Re: [SI-LIST] : What speed scope should I consider?

From: Ron Miller (rmiller@Brocade.COM)
Date: Fri Nov 12 1999 - 15:54:18 PST

• Next message: Vukic, Mladenko: "RE: [SI-LIST] : Assistance with Quad model.."
• Previous message: Phares, Charles: "[SI-LIST] : Assistance with Quad model.."
• In reply to: Muranyi, Arpad: "RE: [SI-LIST] : What speed scope should I consider?"
• Next in thread: Muranyi, Arpad: "RE: [SI-LIST] : What speed scope should I consider?"

Try Tektronix 11801 or a similar sampling scope from HP with the
TDR option.

Ron Miller

"Muranyi, Arpad" wrote:

> Does anyone know of any instrument that can measure transient impedance?
>
> Arpad Muranyi
> Intel Corporation
> ========================================================================
>
> Quote from previous correspondence:
>
> "Network analyzers measure steady state impedance, not transient impedance."
>
> **** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****

--
Ronald B. Miller  _\\|//_  Signal Integrity Engineer
(408)487-8017    (' 0-0 ') fax(408)487-8017
     ==========0000-(_)0000===========
Brocade Communications Systems, 1901 Guadalupe Parkway, San Jose, CA  95131
rmiller@brocade.com,  rbmiller@sjm.infi.net
**** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.  si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****

• Next message: Vukic, Mladenko: "RE: [SI-LIST] : Assistance with Quad model.."
• Previous message: Phares, Charles: "[SI-LIST] : Assistance with Quad model.."
• In reply to: Muranyi, Arpad: "RE: [SI-LIST] : What speed scope should I consider?"
• Next in thread: Muranyi, Arpad: "RE: [SI-LIST] : What speed scope should I consider?"

This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:39:47 PST