Re: [SI-LIST] : Recommendations for High Density PCB to PCB Connection

About this list Date view Thread view Subject view Author view

From: Mandl Martin (Martin.Mandl@cern.ch)
Date: Fri Nov 05 1999 - 08:40:33 PST


You should use linux ;)

You have: inch
You want: mil
        * 1000
        / 0.001

Mike Mayer wrote:
>
> Just checked one of our Solaris machines. It has the same problem.
>
> /usr/share/lib/unittab has a date of July 15 1997, so it has
> apparently been wrong for a while.
>
> --
> =============================================================================
> Mike Mayer Artesyn Communication Products, Inc
> Senior Hardware Design Engineer Madison, WI
> Mike.Mayer@cp.artesyn.com http://www.artesyn.com/cp
> =============================================================================
>
> **** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****

**** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:39:38 PST