Re: [SI-LIST] : Recommendations for High Density PCB to PCB Connection

From: Bill Dempsey ([email protected])
Date: Thu Nov 04 1999 - 09:59:19 PST

Laurence Michaels wrote:

> Mike Ventham wrote:
> >
> > Laurence,
> >
> > I still think you are having calculation problems.
> >
> > 1 sq inch = 1000 mils * 1000 mils = 1000000 sq mil. NOT 10000 sq mil
> >(deleted )
> Ermm... No...
> 1 inch = 100 mils 1 sq inch = 10000 sq mils
> 1 meter = 1000 millimeter 1 sq meter = 1000000 sq millimeter.

Err... no....
1 inch = 1000 mils. Check again
do not pass GO.

>
>
> Contrary to SI prefixes, 1 mil isn't 1/1000 inch.
> It's 1/100 of an inch. That's one of the places I made a mistake.

It's not - your boards must be 10X off in size!!!

Sorry to disappoint!

BD

>
>
> Using my trusty \$X000 computer as a simple calculator:
>
> gitm\$ units
> you have: inch
> you want: mil
> * 1.000000e+02
> / 1.000000e-02
> you have: m
> you want: mm
> * 1.000000e+03
> / 1.000000e-03
> you have: inch2
> you want: mil2
> * 1.000000e+04
> / 1.000000e-04
> you have: 25 mil2
> you want: mm2
> * 1.612900e+00
> / 6.200012e-01
> you have: 0.0025 in2
> you want: mm2
> * 1.612900e+00
> / 6.200012e-01
>
> Strange, but true.
>
> Anyone else care to share their mistakes with the rest of the world?
>
> > Laurence Michaels wrote:
> > >
> > ( deleted)
> > > Argh... I was asleep when I did that calculation. Time to check
> > > everything else I did yesterday :-)
> > >
> > > 0.2*0.5=0.1 square inch.
> > > 0.1/40=0.0025 square inches per connection
> > >
> > > (calculation error was probably here... 0.0025 square inches does
> > > NOT equal 2.5 square mils... that's what I get for using non-metric
> > > units, and only turning on half of my conversion algorithms.
> > > 1 sq in = 10000 sq mil 1 sq meter = 1000000 sq mm)
> > >
> > > 0.0025 square inches gives 1.6 sq mm per connection
> > > 25 square mils gives 1.6 sq mm per connection
> > >
> > > I'm not usually that stupid. (I hope)
> > >
> > > Thanks,
> > > --
> > > Laurence Michaels
> > >
> >
> > --
> > Regards
> >
> > Mike
> > ________________________________________________________________
> > | Mike Ventham - Vice-President Engineering, |
> > | Quantic EMC Inc Headquarters |
> > | Croft House, Chilcompton, 191 Lombard Ave, Winnipeg, |
> > | Somerset, UK, BA3 4JA Manitoba, Canada R3B 0X1 |
> > | Tel: 44 (0)1761 232191 Tel: (204) 942 4000 |
> > | Fax: 44 (0)1761 233549 Fax: (204) 957 1158 |
> > | Email: [email protected] http://www.quantic-emc.com |
>
> --
> Laurence Michaels
> Fiat GDC
>
> **** To unsubscribe from si-list: send e-mail to [email protected] In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****

**** To unsubscribe from si-list: send e-mail to [email protected] In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****

This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:39:35 PST