From: ken ([email protected])
Date: Wed Oct 27 1999 - 08:04:38 PDT
----- Original Message -----
From: Douglas McKean <[email protected]>
To: <[email protected]>
Sent: Tuesday, October 26, 1999 5:41 PM
Subject: Re: [SI-LIST] : About GNDs?
> At 08:05 AM 10/25/99 +0900, lkd wrote:
> >Can you explane about GND Plane, Chasis GND, Shield GND, Chasis, Frame
> GND, Digital GND and relations between these?
> Here is my scant understanding ...
> Ground plane - ground reference (or datum). Could be
> in a printed circuit board, the chassis,
> a floor, an antenna grid.
> Chassis ground - the structure of the product being used
> as a ground reference.
> Shield ground - ground reference usually for a cable shield.
> Chassis - the structure of the product usually
> the case and any support structure
> minus anything else like PCB, power supply ...
> Frame ground - I've only seen this used for telephone
> circuitry in my experience. Same as
> chassis ground but used when differential
> signalling or floating secondary is used.
> Sometimes separated from the ground plane
> of a PCB with a resistor.
> Digital ground - ground reference on a PCB for digital circuitry.
> They could all be connected together to be
> electrically the same point. Or, separately
> connected in any combination thereof.
> **** To unsubscribe from si-list: send e-mail to
[email protected] In the BODY of message put: UNSUBSCRIBE
si-list, for more help, put HELP. si-list archives are accessible at
**** To unsubscribe from si-list: send e-mail to [email protected] In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****
This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:39:21 PST