Re: [SI-LIST] :Thanks: Chassis hole opening and frequencies

From: Doug Brooks ([email protected])
Date: Fri Dec 31 1999 - 09:12:16 PST

• Next message: Jim Freeman: "Re: [SI-LIST] : Clean sheet of paper"
• Previous message: Istvan NOVAK: "Re: [SI-LIST] : Chassis hole opening and frequencies"
• In reply to: Doug Brooks: "[SI-LIST] : Chassis hole opening and frequencies"
• Next in thread: Michael Vrbanac: "Re: [SI-LIST] : Chassis hole opening and frequencies"

Thanks for the quick responses.
Again, Happy New Year to all!!

Doug Brooks

.
************************************************************
See our updated message re in-house seminars on our web page
.
Doug Brooks, President [email protected]
UltraCAD Design, Inc. http://www.ultracad.com

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list
****

• Next message: Jim Freeman: "Re: [SI-LIST] : Clean sheet of paper"
• Previous message: Istvan NOVAK: "Re: [SI-LIST] : Chassis hole opening and frequencies"
• In reply to: Doug Brooks: "[SI-LIST] : Chassis hole opening and frequencies"
• Next in thread: Michael Vrbanac: "Re: [SI-LIST] : Chassis hole opening and frequencies"

This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:39:16 PST