RE: [SI-LIST] : Physcially-small far-end LVDS terminations?

About this list Date view Thread view Subject view Author view

From: Chris Cheng ([email protected])
Date: Mon Dec 20 1999 - 19:15:52 PST


try artech house linpar 2.0 ~$300. herrington and gang pioneered
boundary element method.
chris

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of sweir
Sent: Monday, December 20, 1999 5:04 PM
To: [email protected]
Subject: Re: [SI-LIST] : Physcially-small far-end LVDS terminations?

Dan,

Polar Instruments markets one for about $825.

Regards,

Steve.
At 03:15 PM 12/16/99 -0800, you wrote:
>Milt,
>
>Do you know by any chance where may I find a differential impedance
>calculator?
>Thank you.
>
>Dan Bostan
>Engineer
>Corvia Networks e-mail: [email protected]
>212 Gibraltar Dr. ph: 408.752.0550/x111
>Sunnyvale, CA 94089 fax: 408.752.0551
>
>
>
>----- Original Message -----
>From: Milt Schwartz x3261 <[email protected]>
>To: <[email protected]>
>Sent: Wednesday, December 15, 1999 3:06 PM
>Subject: Re: [SI-LIST] : Physcially-small far-end LVDS terminations?
>
>
> > Eric,
> > You only need one resistor (typ 100 ohms) between the differential
driver
>Pair.
> > The resistor should be equal to the differential impedance of the driver
>traces.
> > The LVDS Driver can be used with resistor values from 90 to 120 ohms and
>provide the specified VOC.
> > The manufacturers use split resistors so the VOS specification in
TIA/EIA
>644 can be monitored.
> >
> > regards milt
> >
> > Milt Schwartz
> > National Semiconductor
> > Interface Applications.
> >
> > **** To unsubscribe from si-list: send e-mail to
>[email protected]. In the BODY of message put: UNSUBSCRIBE
>si-list, for more help, put HELP.
> > si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list
> > ****
> >
> >
>
>**** To unsubscribe from si-list: send e-mail to
>[email protected]. In the BODY of message put: UNSUBSCRIBE
>si-list, for more help, put HELP.
>si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list
>****

**** To unsubscribe from si-list: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list
****

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:39:10 PST