From: D. C. Sessions ([email protected])
Date: Mon Dec 20 1999 - 13:34:02 PST
"Kowal, Keith" wrote:
>
> I looking for a down and simple method of calculating power(average)/pin.
>
> My constaints are : known good IBIS model output
> in-circuit loading (e.g. single output driver /
> multiple input loads)
>
> any comments?> please let me know.
P=FCV^2
for ((un)|(source))-terminated CMOS.
Shunt-terminated logic is pretty much a case of using the IBIS model to
calculate the stable operating point currents, weighing them by duty
cycle, and multiplying by Vddq.
-- D. C. Sessions [email protected]**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****
This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:39:09 PST