Re: [SI-LIST] : Physcially-small far-end LVDS terminations?

From: Milt Schwartz x3261 ([email protected])
Date: Wed Dec 15 1999 - 15:06:15 PST

• Next message: Eric Bogatin: "RE: [SI-LIST] : Mutual Inductance between 2 Power Planes"
• Previous message: D. C. Sessions: "Re: [SI-LIST] : Physcially-small far-end LVDS terminations?"
• Maybe in reply to: Eric Goodill: "[SI-LIST] : Physcially-small far-end LVDS terminations?"
• Next in thread: [email protected]: "Re: [SI-LIST] : Physcially-small far-end LVDS terminations?"

Eric,
You only need one resistor (typ 100 ohms) between the differential driver Pair.
The resistor should be equal to the differential impedance of the driver traces.
The LVDS Driver can be used with resistor values from 90 to 120 ohms and provide the specified VOC.
The manufacturers use split resistors so the VOS specification in TIA/EIA 644 can be monitored.

regards milt

Milt Schwartz
National Semiconductor
Interface Applications.

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list
****

• Next message: Eric Bogatin: "RE: [SI-LIST] : Mutual Inductance between 2 Power Planes"
• Previous message: D. C. Sessions: "Re: [SI-LIST] : Physcially-small far-end LVDS terminations?"
• Maybe in reply to: Eric Goodill: "[SI-LIST] : Physcially-small far-end LVDS terminations?"
• Next in thread: [email protected]: "Re: [SI-LIST] : Physcially-small far-end LVDS terminations?"

This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:39:07 PST