RE: [SI-LIST] : XTK multiboard simulation using amp spice connector models....... ..

About this list Date view Thread view Subject view Author view

From: Syed Huq (shuq@cisco.com)
Date: Wed Dec 01 1999 - 21:21:50 PST


TMP does model processing. If your gcf is not setup correctly, you could see
some problems(see tmp.log). We use the NETS_FILE scheme a lot since the boards are
complex and it helps focus on particular interfaces of interest(nets defined in .net file).

Regards,
Syed
Cisco Systems, Inc

> I have discovered that the
> TMP program has some important limitations when executed in conjunction
> with a Net file. However, ISF2XTK cooperates well with .net and
> generates a Topology file containing only those nets dictated by the Net
> file.
>
> Best Regards,
>
> Abe Raizi
> Anigma, Inc.
>

**** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:39:04 PST