From: Jim Freeman (firstname.lastname@example.org)
Date: Wed Dec 01 1999 - 12:07:56 PST
Adrian talked about basic topics for discussion. Here are a few
1. TEM and TM modes in transmission lines or for EMC. What are the
assumptions that drive one or the other?
2. Differential signalling - broadside coupling or edge coupling,
differential mode ground and common mode ground, EMC implications for
different types of coupling.
3. Methods for describing more accurately the behavior of transmission
lines and return paths under changing frequency conditions.
Incorporation of dielectric losses in the simulation and/or
calculations. Incorporation of the harmonics of the digital signal with
corresponding changes in impedance to better emulate dispersion of the
digital signal that gives rise to jitter/skew.
These are just a few of the more esoteric concepts that I would like to
**** To unsubscribe from si-list: send e-mail to email@example.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list
This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:39:03 PST