Re: [SI-LIST] : Re: IBIS datasheets for PCI and DDR

About this list Date view Thread view Subject view Author view

From: Adrian Shiner ([email protected])
Date: Tue Nov 23 1999 - 12:18:14 PST


This makes one wonder how on earth the IC designers/manufacturers are
working. Product "not fit for purpose" (UK law concept) springs to mind at
the IC level.

Who is active on the ISO committees? That is where the future lies for
standardization.

Adrian

----- Original Message -----
From: <[email protected]>
To: <[email protected]>
Sent: 23 November 1999 14:46
Subject: Re: [SI-LIST] : Re: IBIS datasheets for PCI and DDR

> Thanks, DC. Are you working on the DDR committee? I was looking at the
> spec the other day, and I noticed there was a really nice capacitance
spec,
> some IV curves, but no rise/fall times, which makes it hard to create a
> behavioral model that's consistent with the spec. What's your take? Has
> anyone proposed adding edge rates?
>
> Greg Edlund
> Advisory Engineer, Critical Net Analysis
> IBM
> 3650 Hwy. 52 N, Dept. HDC
> Rochester, MN 55901
> [email protected]
>
>
>
> **** To unsubscribe from si-list: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list
> ****
>
>

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:39:02 PST