Re: [SI-LIST] : IBIS datasheets for PCI and DDR

About this list Date view Thread view Subject view Author view

From: xingjian cai (emlab@hotmail.com)
Date: Thu Nov 18 1999 - 05:22:33 PST


Dear Sirs,
I do agree with Rachild Chen. Why the IC vendors are so unwillingly to obey
the IBIS,when they release their decices' ibs files,since they all together
made the IBIS.
There are so many mistakes could be found in almost any *.ibs file available
accordingly to the IBIS.
It is time to let the vendors to regularize the *.ibs they released strictly
according to IBIS version 3.0 or above.
Or we reserve our rights not to apply their device any more.

Vendors,Pls remember if you spent one more minute, can spare one hour of
every customer of thousands!

Regards!

kinger cai

>From: Rachild Chen <rachel.chen@huawei.com.cn>
>Reply-To: si-list@silab.eng.sun.com
>To: si-list@silab.eng.sun.com
>Subject: Re: [SI-LIST] : IBIS datasheets for PCI and DDR
>Date: Wed, 17 Nov 1999 09:57:05 +0800
>
>Ha..Ha,Amen!
>
>There is so many people caring about the modles like me.I have a big
>trouble in models.I ever asked IC vendors for the spice models by NDA.But
>they gave me the macro spice models and have many mistakes.It need many
>times feedbacks
>when I get the right spice models.It is too troubling.
>
>In the same times,I get many IBIS models from IC vendors.So many errors in
>these models .I think they are trash and give us too much error
>informations.So I want to know how you treat models.
>
>I think the IBIS needs improvement and considering more parameters to meet
>high speed analyse.
>
>Regards,
>
>Rachild
>
>Fred Balistreri wrote:
>
> > Scott McMorrow wrote:
> > >
> > > Chris Cheng wrote:
> > >
> > >
> > > spice only for DDR i/o but then again, why do
> > > u need ibis if u have the full spice......
> > >
> > > Lets see ...
> > > Faster performance in simulation by 10-100X ...
> > > Encapsulation of standard measurement points ...
> > > Encapsulation of package parameters ...
> > > Equivalent or better accuracy depending on method of
> > > creating and characterizing the model ...
> > > More widespread simulator support.
> > >
> > > Hmmm ... I can't imagine what the need or desire for
> > > IBIS models would be.
> > >
> > > regards,
> > >
> > > scott
> > >
> > >
> > > --
> > > Scott McMorrow
> > > Principal Engineer
> > > SiQual, Signal Quality Engineering
> > > 18735 SW Boones Ferry Road
> > > Tualatin, OR 97062-3090
> > > (503) 885-1231
> > > http://www.siqual.com
> > >
> > >
> > > Name: scott.vcf
> > > Part 1.2 Type: text/x-vcard
> > > Encoding: 7bit
> > > Description: Card for Scott McMorrow
> > I agree strongly with most of the statements but disagree with the
> > accuracy issue. Assuming that the SPICE model is correct and the IBIS
> > model is correct, there is no way that an IBIS model can be more
> > accurate than a SPICE model. This is regardless of where the IBIS
> > model came from. Keep in mind that MOST IBIS models are produced from
> > the SPICE model using s2ibis. That means by default MOST IBIS models
> > cannot be more accurate than the source. For one thing SPICE is a
> > different animal and contains much more information regarding both the
> > topology and process of the design. Secondly there have been and
> > continue to be accuracy as well as other issues with IBIS. If this were
> > not the case there would not be 64 birds to date and counting.
> >
> > Both the IBIS and SPICE model are prone to incorrect data. Being not
> > correct is NOT the same as model accuracy. In my view both SPICE and
> > IBIS models have their application. There is some overlap in the SI
> > community. You probably should not use SPICE models to simulate a
> > whole board. But accuracy is a different issue. For most SI applications
> > IBIS will do. But there are cases where one may need the SPICE model.
> >
> > Best Regards,
> > --
> > Fred Balistreri
> > fred@apsimtech.com
> >
> > http://www.apsimtech.com
> >
> > **** To unsubscribe from si-list: send e-mail to
>majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
>si-list, for more help, put HELP. si-list archives are accessible at
>http://www.qsl.net/wb6tpu/si-list ****
>
>
><< vcard.vcf >>

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

**** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:38:59 PST