RE: [SI-LIST] : Schottky diode termination

Peterson, James F ([email protected])
Wed, 28 Oct 1998 08:48:23 -0500

After quickly leafing through a couple data books, I think you're right.

From: [email protected] [SMTP:[email protected]]
Sent: Wednesday, October 28, 1998 8:23 AM
To: [email protected]
Subject: Re: [SI-LIST] : Schottky diode termination

> Clamp diodes inside TTL devices are useless for termination on the
high side
> because they are so far above a TTL high signal (diode doesn't
turn on until
> ~5.6V, while the signal is ringing around 3V).

I thought the 74LS series didn't have any clam diodes to Vcc, only
to ground.


**** To unsubscribe from si-list: send e-mail to [email protected] In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at ****