RE: [SI-LIST] : Conducted EMC Testing of PLL jitter

Jeffrey_Hailey@Dell.com
Wed, 30 Sep 1998 08:41:51 -0500

This is a passive bi-directional device. I don't know the maximum input
power to it, though.

> -----Original Message-----
> From: Ray Anderson [SMTP:raymonda@radium.Eng.Sun.COM]
> Sent: Tuesday, September 29, 1998 3:56 PM
> To: Farrokh.Mottahedin@quantum.com
> Cc: si-list@silab.Eng.Sun.COM
> Subject: RE: [SI-LIST] : Conducted EMC Testing of PLL jitter
>
>
> >
> > Ray,
> >
> > I don't consider myself an expert on this subject but would like to
> > bring to your attention a piece of equipment available from HP which can
> be
> > used for this application without direct or transformer coupling. The
> > equipment I have in mind is called the 11945A Close-field Probe Set that
> can
> > supply 0.5 watts of power over 9KHz to 1 GHz.
> >
> > Regards,
> >
> > Farrokh Mottahedin
> > Quantum Corporation
> > (408) 324-7934
> > farrokh.mottahedin@quantum.com
>
>
> From what I read in the HP catalog this looks like a receive probe
> for sniffing the B field near a board. Is it a passive device that
> functions bidirectionally?
>
>
> -Ray
>
>
> **** To unsubscribe from si-list: send e-mail to
> majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
> si-list, for more help, put HELP. si-list archives are accessible at
> http://www.qsl.net/wb6tpu/si-list ****