[SI-LIST] : Design Note on Right Angle Bends

Mike Mayer (Mike.Mayer@heurikon.com)
Fri, 10 Jul 1998 13:17:15 -0500 (CDT)

I am puzzled by a design note on the Ultracad web site:

http://www.ultracad.com/tech.htm

It states that:

THE REASON YOU DON'T USE RIGHT ANGLE TURNS ON CIRCUIT BOARDS IS
THAT RIGHT ANGLE CORNERS BEGIN TO LOOK LIKE ANTENNAS.

There are no references given or any further explanation. Can anyone
explain what they mean?

-- 
=============================================================================
Mike Mayer                               Artesyn Communication Products, Inc
                                         Madison, WI
                                         http://www.artesyn.com/cp
=============================================================================

**** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****