Re: [SI-LIST] : IBIS to Spice

Syed Huq (huq@rockie.nsc.com)
Tue, 12 May 1998 14:49:59 -0700

Philip,

So far, the IBIS to SPICE has been supported by a few SPICE
simulator vendor. Applied Simulation Tech(www.edac.org/Apsim),
AMPredictor(www.amp.com)are the once I remember. Also check
out the Intusoft web site(www.intusoft.com)they are supposed
to come up with a 'shareware' that will create a SPICE 2G.6 model
out of IBIS.

Last I heard, Avanti is working on project to genearate a IBIS
to HSPICE behavioral model. No release date heard.

Microsim no longer supports SPICE-to-IBIS. They only created a
IBIS translator for IBISv1.1

Regards,
Syed.
National Semiconductor Corp.

> From owner-si-list@silab.Eng.Sun.COM Tue May 12 14:33:41 1998
> Date: Tue, 12 May 1998 12:27:13 -0700
> From: "Philip R. Gantt" <pgantt@cisco.com>
> Organization: Cisco Systems
> X-Mailer: Mozilla 4.03C-CISCOENG [en] (X11; U; SunOS 5.5.1 sun4u)
> To: "si-list@silab.Eng.Sun.COM" <si-list@silab.Eng.Sun.COM>
> Subject: [SI-LIST] : IBIS to Spice
> Content-Type> : > text/plain> ; > charset=us-ascii>
> Content-Transfer-Encoding: 7bit
> Sender: owner-si-list@silab.Eng.Sun.COM
>
> Hello list,
>
> Does anyone know of any tools that will convert IBIS models to Spice
> models? Also, where might such a tool be acquired? Thanks.
>
> --
> Philip R. Gantt pgantt@cisco.com . .
> Phone : (408) 527-2918 | |
> Fax : (408) 526-5504 ||| |||
> Pager : (408) 814-8868 ||||| |||||
> 170 West Tasman Drive, SJ-G2 ||||||||| |||||||||
> San Jose, CA 95134-1706 (U.S.A.) .:|||||||||||||||||||||||||:.
>
>
>
>
>