Re: [SI-LIST] : PCB track length and ringing

[email protected]
Tue, 23 Sep 97 09:48:27 -0700

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Mike Jenkins: "Re: [SI-LIST] : Formulas for Calculating PTH Capacitance"
Previous message: Chris Heard/US/3Com: "[SI-LIST] : Formulas for Calculating PTH Capacitance"

Simply due to the reflections caused by impedance mismatch somewhere
in the trace between source and destination. Mismatch can occur for a
multitude of reasons such as vias, changing planes, stubs, tees,
capacitive inputs, inductive traces etc., etc. That is based on
transmission line theory found in elementary electromagnetics
textbooks.
Hans

______________________________ Reply Separator _________________________________
Subject: [SI-LIST] : PCB track length and ringing
Author: Non-HP-gkrishna ([email protected]) at HP-ColSprings,mimegw5
Date: 9/22/97 8:32 PM

Hi,

Can someone explain how the PCB (printed circuit board) track (signal
trace) length causes ringing in the High Speed Digital Signal systems.

Regards,
Gopalkrishna

Next message: Mike Jenkins: "Re: [SI-LIST] : Formulas for Calculating PTH Capacitance"
Previous message: Chris Heard/US/3Com: "[SI-LIST] : Formulas for Calculating PTH Capacitance"