RE: FCT806 Clock Driver

haller@wonder.ENET.dec.com
Fri, 17 Jan 97 08:44:08 EST

------------------Reply to mail dated 16-JAN-1997 17:22:30.42------------------

Fabrizio,
I would concur with Gary D. Peterson that lifting the lead and
placing a 0805 in series is probably your best option. You
probably won't find a pin compatable part with low output skew.
I typically use the part with 50 ohm series resistors and
50 ohm module etch.

regards,
Robert J. Haller
Principal Harware Engineer
Digital Equipment Corporation
129 Parker St. PK03-01/N97
Maynard Ma. 01754-32198
(508) 493-4112
haller@wonder.ENET.dec.com