Re: [SI-LIST] : Of thermal reliefs and signal integrity....

Mitch Morey (cadpro2K@DACafe.com)
Wed, 13 Oct 1999 14:28:44 -0700

Not a chance. I've been using direct connects to the plane layer for a
half dozen years or more, and I've never been told it's either
unmanufacturable to that the spokes are necessary for signal integrity.
The only holes I relieve are the ones that will be soldered to. A direct
connect is much better connection as far as integrity issues from what I
understand.

More and more horse-puky!

Mitch morey
San Diego
CadPro2K@dacafe.com

(the 70s and 80s are over, have it your way!)
_____________________________________________________________
Tired of limited space on Yahoo and Hotmail?
Free 100 Meg email account available at http://www.dacafe.com

**** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****