Re: [SI-LIST] : internal series resistors

S. Weir ([email protected])
Sun, 10 Oct 1999 00:44:16 -0700

Roman,

The combination of the 25ohm resistors of most of these devices and the
intrinsic VI curves of the drivers sans resistors is intended for a 50ohm
transmission line.

Regards,

Steve
At 11:05 AM 10/10/1999 +1000, you wrote:
>Hello,
>
>There are clock buffers with internal dumping resistors in outputs in range
>around 25ohm on the market.
>Would anybody out there have an idea about recommended track impedance for
>buffer ouputs configured as a simple point to point connection?
>
>Regards
>
>Roman Seifert
>Aristocrat
>Sydney - Australia
>[email protected] <mailto:[email protected]>
>
>
>**** To unsubscribe from si-list: send e-mail to
>[email protected]. In the BODY of message put: UNSUBSCRIBE
>si-list, for more help, put HELP. si-list archives are accessible at
>http://www.qsl.net/wb6tpu/si-list ****

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****