[SI-LIST] : Ibis models

Jim Freeman (freeman@mavericknetworks.com)
Fri, 24 Sep 1999 11:01:32 -0700

Hi All,
I've successfully used the NCState software to generate IBIS models
for CMOS TTL buffers. I am now wondering if there is any IBIS standard
for SSTL_2 and/or HSTL buffers. In the NCSU program, there are only
ECL(also used for ECL) and TTL single ended buffers. The Vinh adn Vinl
parameters are fixed over PVT(process,voltage and temperature) and these
are reported in the IBIS output. To the best of my knowledge, these are
not actually used in the I/O buffer simulation but would be used for an
input buffer simulation. but I digress... The basic question remains
above.

Thanks
Jim Freeman

**** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****