l have a question concerning the use of the various I/O technologies
(specifically HSTL and GTL+) in systems requiring live insertion of boards.
Can a HSTL class four receiver on an un-powered board be plugged into a bus
which is sitting idle at 1.5V?
(Assume a point to point bi-directional 50 ohm bus with a 50 ohm pull-up
resistor tied to 1.5V at both ends)
**** To unsubscribe from si-list: send e-mail to firstname.lastname@example.org. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****