RE: [SI-LIST] : Stackup Extraction

Mike Mayer ([email protected])
Thu, 19 Aug 1999 08:37:44 -0500 (CDT)

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Michael C. Greim: "RE: [SI-LIST] : Stackup Extraction"
Previous message: Christian S. Rode: "[SI-LIST] : Updated differential article"

An issue that comes up on some of our boards is that the overall board
thickness is spec'ed as .062". On some of our boards the finished
layup gets compressed to .062". If you depend on the data in the PCB
tool it has to take that into account and not just use the "raw",
pre-compression dielectric thicknesses.

-- 
=============================================================================
Mike Mayer                               Artesyn Communication Products, Inc
                                         Madison, WI
                                         http://www.artesyn.com/cp
=============================================================================


**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.  si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****

Next message: Michael C. Greim: "RE: [SI-LIST] : Stackup Extraction"
Previous message: Christian S. Rode: "[SI-LIST] : Updated differential article"