[SI-LIST] : LVTTL Drivers vs. LS

Chris Bobek ([email protected])
Mon, 19 Jul 1999 07:32:50 -0700

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: [email protected]: "RE: [SI-LIST] : How to treat the ASIC package pin-assigns"
Previous message: Mike Degerstrom: "Re: [SI-LIST] : even-odd mode influence"

I am doing a 6U VME master/slave card design. There are several
reccomendations for the transceivers and drivers. All of them happen to be
5V. Unfortunately, this is NOT an option since we can't afford the several
watts (~3W) they will potentially burn. So, I've opted for 3.3V LVTH family
from TI.

As far as I can tell, these parts meet all of the same xcvr specifications
as written in the VITA spec.

Am I correct to assume that as long as the specs are met, this xcvr should
work? Or, are there some complications that result just because it's
powered with 3.3V?

Thanks,

Chris

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****

Next message: [email protected]: "RE: [SI-LIST] : How to treat the ASIC package pin-assigns"
Previous message: Mike Degerstrom: "Re: [SI-LIST] : even-odd mode influence"