[SI-LIST] : BGA pin location
Takashi Yanagimoto ([email protected])
Mon, 19 Jul 1999 20:57:22 +0900
This is a multi-part message in MIME format.
------=_NextPart_000_0022_01BED229.4C3B4F40
Content-Type: text/plain;
charset="iso-2022-jp"
Content-Transfer-Encoding: 7bit
Does anyone help
how to locate the power,GND pin on BGA Package?
Espetially it should be located on outer lead or inner .
(Which is more important to consider the factor of location with
BiPath-capacitor
that is to locate the BiPath-cap is on the same side, cause the distance
between BGA package and the BiPath-cap without Through-hole connected to
inner Plane of Power or just distance with Through-hole to the opposite
side
capacitor (on the solder side)?
I'm sorry I'm not good at writing english.
------=_NextPart_000_0022_01BED229.4C3B4F40
Content-Type: text/html;
charset="iso-2022-jp"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">
Does anyone help
how to locate the power,GND =
pin on BGA=20
Package?
Espetially it should be located on =
outer lead or=20
inner .
(Which is more important to consider =
the factor=20
of location with BiPath-capacitor
that is=20
to locate the BiPath-cap is on the same side, cause the=20
distance
between=20
BGA package and the BiPath-cap without Through-hole connected=20
to
inner Plane of Power or =
just=20
distance with Through-hole to the opposite side
capacitor (on the solder=20
side)?
I'm sorry I'm not good at writing=20
english.
------=_NextPart_000_0022_01BED229.4C3B4F40--
**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****