Now I have a ASIC package design.There is a lot of data bus and a clock signal in this package.
How can I do the pin assigns?If I put the clock pin beside the data pins and insert a gnd pin,can it improve the SI?
I need your helps and wish can get some advices about how to pin assign the ASIC package.I know it is very key in HSSD to pin assign the connector and I can get a good pin assign by simulation.
**** To unsubscribe from si-list: send e-mail to firstname.lastname@example.org. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****