Re: [SI-LIST] : Edge Rates

Steve Weir (weirsp@a.crl.com)
Thu, 08 Jul 1999 13:27:36 -0700

The datasheets are your minimum for a starting point. IBIS models w/b
better. For FCT and fast SRAM's you will be in the 0.5 to 1nS risetime
arena for light loads.

Regards.
At 03:06 PM 7/8/99 -0400, you wrote:
>I am a newcomer to signal integrity analysis and would like to know how
>to find out what the typical edge rates (i.e. rise and fall times) of
>some of the industry standard logic families are. These include FCT
>logic, SDRAMs and Syncburst SRAMs . I have an upcoming project that
>will use these devices and would loike to perform some signal integrity
>analysis.
>
>Ken Patterson
>Electronic Engineer
>ADC Broadband Communications/Pathway Division
>email:ken.patterson@pathway-inc.com
>
>
>**** To unsubscribe from si-list: send e-mail to
>majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
>si-list, for more help, put HELP. si-list archives are accessible at
>http://www.qsl.net/wb6tpu/si-list ****
>

**** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****