Sorry 'bout that. One and a half inches is fine.
Paul
Ingraham, Andrew wrote:
> >Having half of the four cards component-side-down is not a problem;
> >fitting the assembly into about 1.4 vertical inches is.
>
> Technically, you can't. Each card needs at least 0.570 inches on one side
> plus 0.105 inches on the other plus the thickness of the board (0.07 inches
> max), for a total of 2 * 0.745 = 1.49 inches. If you squeeze it into a
> space only 1.4 inches high, some cards will not fit without
> rubbing/shorting.
>
> If you know exactly what PCI cards you will be putting into it, this might
> not be a problem for you.
>
> Regards,
> Andy Ingraham
**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****