Doug
HP ADS is the "Cadillac" of simulators, works in the frequency and
time domain and integrates with Mentor and Allegro Cadence.
Ron MIller
Douglas McKean wrote:
> Hello Professionals,
>
> Anyone with microwave experience care to
> recommend simulation software that aids
> with microwave PCB layouts?
> Input would be Mentor.
>
> Or can I assume software such as Hyperlynx
> or Incases would be sufficient?
>
> Recommendations off line are invited as well.
>
> Regards, Doug McKean
>
> **** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****
--
Ronald B. Miller _\\|//_ Signal Integrity Engineer
(408)487-8017 (' 0-0 ') fax(408)487-8017
==========0000-(_)0000===========
Brocade Communications Systems, 1901 Guadalupe Parkway, San Jose, CA 95131
[email protected], [email protected]
--------------6C1D13F13EF80D9AA8DB6DD8
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
Doug
HP ADS is the "Cadillac" of simulators, works in the frequency and
time domain and integrates with Mentor and Allegro Cadence.
Ron MIller
Douglas McKean wrote:
Hello Professionals,
Anyone with microwave experience care to
recommend simulation software that aids
with microwave PCB layouts?
Input would be Mentor.
Or can I assume software such as Hyperlynx
or Incases would be sufficient?
Recommendations off line are invited as well.
Regards, Doug McKean
**** To unsubscribe from si-list: send e-mail to [email protected].
In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list
****
--
Ronald B. Miller _\\|//_ Signal Integrity Engineer
(408)487-8017 (' 0-0 ') fax(408)487-8017
==========0000-(_)0000===========
Brocade Communications Systems, 1901 Guadalupe Parkway, San Jose, CA 95131
[email protected], [email protected]
--------------6C1D13F13EF80D9AA8DB6DD8--
**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****