RE: [SI-LIST] : 20-H Rule for Power Planes

Aldridge, Tomm V ([email protected])
Thu, 27 May 1999 08:11:02 -0700

stitching is the use of vias to tie the outer (generally) layers together to
form a cage around the inner layers and to break up the edge length of the
board to reduce emissions.

-----Original Message-----
From: Jon Keeble [mailto:[email protected]]
Sent: Wednesday, May 26, 1999 5:50 PM
To: '[email protected]'
Subject: RE: [SI-LIST] : 20-H Rule for Power Planes

-----Original Message-----
From: Tomm aldridge [mailto:[email protected]]

>In fact, at some conditions, the edge of
the board becomes a slot radiator such that stitching becomes necessary.

Lest

What is "stiching"?

Jon Keeble

**** To unsubscribe from si-list: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list, for more help, put HELP. si-list archives are accessible at
http://www.qsl.net/wb6tpu/si-list ****

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****