Re: [SI-LIST] : Flat Ribbon Cable substitutes

Dan Irish ([email protected])
Wed, 26 May 1999 09:57:57 -0700


If it's shielding you need, try Zippertubing. This is a separate
shield applied over the flat cable. Of course, the difficult
part is terminating the shield using standard ribbon cable
connectors, and Zippertubing offers a good alternative to
changing to shielded connectors.


**** To unsubscribe from si-list: send e-mail to [email protected] In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at ****