Re: [SI-LIST] : Decoupling caps and power plane effects

Fred Balistreri (fred@apsimtech.com)
Thu, 20 May 1999 15:42:10 -0700

Dr. Edward P. Sayre wrote:
>
> For us uninformed folks, just what does PEEC stand for and what is a PEEC
> simulator?
>
> ed sayre
> ===========================
> At 05:17 PM 5/17/99 -0500, you wrote:
> >I use the Pacific Numerix tool which is also a PEEC based simulator to
> >model the power and ground structure and place capacitors( non-ideal models
> >) at the appropriate
> >locations in the circuit simulator to generate the power and ground noise
> >with very good
> >result. However, the modeling time and circuit simulation time is very long.
> >
> >Regards, M. Chan
> >Email: Michael.Chan@COMPAQ.com
> >
>
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+
> | NORTH EAST SYSTEMS ASSOCIATES, INC. |
> | ------------------------------------- |
> | "High Performance Engineering & Design" |
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+
> | Dr. Ed Sayre e-mail: esayre@nesa.com |
> | NESA, Inc. http://www.nesa.com/ |
> | 636 Great Road Tel +1.978.897-8787 |
> | Stow, MA 01775 USA Fax +1.978.897-5359 |
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+
>
> **** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at

PEEC stands for Partial Electrical Equivalent Circuits. The paper that
introduced PEEC is from IBM.

Best Regards,

-- 
Fred Balistreri
fred@apsimtech.com

http://www.apsimtech.com

**** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****