[SI-LIST] : What speed scope should I consider?

Chris Bobek ([email protected])
Thu, 20 May 1999 11:32:54 -0700

We are designing an SBC with a processor speed of 266MHz and bus speed of
66MHz. There are different logic families used on the board, some CMOS,
some TTL -- just standard stuff (no ECL or GTL, etc.).

Based upon that general scenerio, what bandwidth scope should be adequate
for doing SI analysis on our board? We are currently looking at a scope
with a 1.5GHz bandwidth (8GHz sampling rate). This seems sufficient, but I
would like other opinions...

Thanks,

Chris

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****