ed sayre
===========================
At 05:17 PM 5/17/99 -0500, you wrote:
>I use the Pacific Numerix tool which is also a PEEC based simulator to
>model the power and ground structure and place capacitors( non-ideal models
>) at the appropriate
>locations in the circuit simulator to generate the power and ground noise
>with very good
>result. However, the modeling time and circuit simulation time is very long.
>
>Regards, M. Chan
>Email: [email protected]
>
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+
| NORTH EAST SYSTEMS ASSOCIATES, INC. |
| ------------------------------------- |
| "High Performance Engineering & Design" |
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+
| Dr. Ed Sayre e-mail: [email protected] |
| NESA, Inc. http://www.nesa.com/ |
| 636 Great Road Tel +1.978.897-8787 |
| Stow, MA 01775 USA Fax +1.978.897-5359 |
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+
**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****