RE: [SI-LIST] : Ground gap problem

Rajkumar C (craj@india.ti.com)
Tue, 27 Apr 1999 00:41:17 +0530

Hi guys,

I have a very basic question.
Generally, there is a guideline that every
IC's used in the PCB should have a decoupling
capacitor near the power and ground pins.
Here is my question:
In the PCB, I have a separate power plane and
ground plane. For all the IC's I am using the Decoupling
capacitors.

* connect the power and ground pins to the Decoupling
capacitors first and then connect the capacitors to Planes
(or)
* Connect the Power and ground pin to the plane directly and
have decoupling capacitors connected to power and ground plane
and also placed near the IC's power supply pin.

In the above two methods which is best and why?

Expecting your answers.

Thanks and regards,
Rajkumar.

**** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****