[SI-LIST] :EMI filtering and ESD protection

Greenhut Avi-BCMS17 (Avi_Greenhut-BCMS17@email.mot.com)
Tue, 23 Mar 1999 07:25:18 +0200

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: kyunghw1@unitel.co.kr: "[SI-LIST] : Memory Burn-In Board & Driver's Characteristics"
Previous message: Ray Anderson: "Re: [SI-LIST] : Ferrite Bead models"

I am investigating a number of technologies which will allow component count
reduction on our products.
Thick film arrays are freely available today and offer a good starting
point.
In a Controller I/O section where capacitors and diodes are used for EMI
filtering and ESD protection.
I am considering two options

1. Use capacitor and diode arrays
2. Use Multiguard arrays

Do you have any supporting data comparing either cap arrays or multiguard
with the discrete equivalent.

Avi Greenhut
Motorola Communication Israel
3 Kremenetski Street P.O.B 25016 Tel - Aviv 67899 Israel
Tel: 972-3-565-8795 , Fax: 972-3-565-8778
E-mail: BCMS17@email.mot.com

**** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****

Next message: kyunghw1@unitel.co.kr: "[SI-LIST] : Memory Burn-In Board & Driver's Characteristics"
Previous message: Ray Anderson: "Re: [SI-LIST] : Ferrite Bead models"