[SI-LIST] : Looking for a sensitive Gigabit receiver part

Dr. Edward P. Sayre (esayre@nesa.com)
Mon, 15 Mar 1999 10:32:39 -0500

Fellow SI'ers:

Perhaps someone can help out. I have the need to find a receiver
chip capable of receiving low level differential Gigabit signals
in like Fibre Channel and outputting standard terminated
differential PECL out.

The receiver characteristics I am looking for is a sensitive
front end, like a comparator with a narrow range (better
than the receiver Eye-diagram sensitivity requirements found
in the Fibre Channel spec), operates at Gigabit speeds
(up to 2.125Gbps) and is a 5V (or 3.3 V part).

Thanks in advance for your help.

ed sayre

| ------------------------------------- |
| "High Performance Engineering & Design" |
| Dr. Ed Sayre e-mail: esayre@nesa.com |
| NESA, Inc. http://www.nesa.com/ |
| 636 Great Road Tel +1.978.897-8787 |
| Stow, MA 01775 USA Fax +1.978.897-5359 |

**** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****