RE: [SI-LIST] : viewing the output of LARGE hspice transient runs

Mellitz, Richard (richard.mellitz@intel.com)
Fri, 5 Feb 1999 15:14:38 -0800

Ray,

Are you usingthe probe option and print lines to reduce tr0?

... Rich

-----Original Message-----
From: Ray Anderson [mailto:raymonda@radium.Eng.Sun.COM]
Sent: Friday, February 05, 1999 12:44 PM
To: si-list@silab.Eng.Sun.COM
Subject: [SI-LIST] : viewing the output of LARGE hspice transient runs

A quick question to the list, has anyone sucessfully opened
a large (> 3GByte) .tr0 data file generated by Hspice with the Avant!
Awaves viewer?

The simulation is the result of a colleague's overnite oscillator
startup simulation and seems to have run to completion without errors.


Awaves claims to be unable to open the file. I've also tried the
freeware hsview program and got the same error message.

I know that the Solaris operating system makes a distinction
between regular (<2Gb) and large files (>2Gb) and this makes me suspicious
that there may be a fundamental problem in opening the large .tr0 file
if the viewer wasn't written to account for the need to deal with
the very large file sizes.

Relevant comments and/or experiences solicited :)


-Ray




/\
\\ \
\ \\ /
/ \/ / / Raymond E. Anderson WB6TPU
/ / \//\ Staff Signal Integrity Engineer
\//\ / / Sun Microsystems
/ / /\ / 901 San Antonio Road MS MPK15-103
/ \\ \ Palo Alto, CA 94303
\ \\
\/ (650) 786-3272
(650) 786-6457 fax
raymond.anderson@Sun.Com


**** To unsubscribe from si-list: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list, for more help, put HELP. si-list archives are accessible at
http://www.qsl.net/wb6tpu/si-list ****

**** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****