I noticed that the indecision threshold for GTL is +/-50mV,
while the indecision region for GTLP is +/- 200mV.
Can I buy myself +/-150mV margin by transmitting with GTLP
and receiving the same signal with GTL?
I know the threshold points/Vrefs are different (1V vs. 0.8V) but
my sims show that the GTLP driver is fairly clean around
0.8V +/-50mV.
I would appreciate any advice!
Thanks,
Tony Joyner
[email protected]
**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****