[SI-LIST] : Copper pour beneath oscillators,

About this list Date view Thread view Subject view Author view

From: Shoaib (shoaib@and-or.com)
Date: Mon Jun 04 2001 - 22:23:39 PDT


Hi,
     I'm a novice and my question might sound stupid but nontheless its a question to me. I'm desiging a board with 20 Mhz clock oscillators on it, i have put copper pour on the vacant areas of the board and connected the copper to the ground (common to all components), this copper also extends beneath the oscillators. The designer of the circuit is not happy with it and says that it will inflict all the noise generated by other components onto the oscillators output and rather he suggests that copper beneath the oscillators should remain unconnected this way any noise inflicted on or by the oscillator will remain isolated and not cause any problems. Can anyone please explain as it is a little confusing for me.
 Thanx in advance,
     Shoaib



**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:12:14 PDT