From: C Deibele ([email protected])
Date: Tue May 29 2001 - 07:22:32 PDT
I have a design where I need to have circa 5 mil lines - and I need them
manufactured to a tolerance better than standard acid etching (which I saw was,
at best, +/- 0.5 mil). I will be working with a teflon circuit card...0.5 oz
copper. Can anyone give me some advice of some technique for making circuit
traces/vendors who are capable of making circuit boards like this?
The circuit boards will be standard microstrip (i.e. two layer).
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected] In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:12:10 PDT