[SI-LIST] : Re: Bends in PCB Traces

About this list Date view Thread view Subject view Author view

From: Scott McMorrow (scott@vasthorizons.com)
Date: Wed May 23 2001 - 09:48:17 PDT


All,

Gus and I have received quite a few responses and
a few questions about our results. Please regard the information
as preliminary, with only some of the data complied at this time.
There are more test structures built on the test board to explore
different corner geometries. We plan to include this information
in the "published" version.

regards,

scott

--
Scott McMorrow
Principal Engineer
SiQual, Signal Quality Engineering
18735 SW Boones Ferry Road
Tualatin, OR  97062-3090
(503) 885-1231
http://www.siqual.com

**** To unsubscribe from si-list or si-list-digest: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu ****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:12:05 PDT