[SI-LIST] : Spread Spectrum in High Speed Serial Design

About this list Date view Thread view Subject view Author view

From: x Ye ([email protected])
Date: Mon May 21 2001 - 10:11:06 PDT


Hi all,

I have a question about using SSC (Spread Spectrum Clock) in High Speed serial
design. There has been concerns that if the transceiver and the receiver use
different clocks (and both are SSC), the receiver may have difficulty to track
the bit drift due to the timing difference (which is somewhat 1 bit drift
every 200 bits for a 0.5% down-spread). Anybody has the experience or any
comment?

Thanks,

XY

____________________________________________________________________
Get free email and a permanent address at http://www.netaddress.com/?N=1

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:12:02 PDT